Surface Cleaner Tip Chart

Surface Cleaner Tip Chart – Having different pressure washer nozzles gives you a lot of versatility in what you can clean. So looking at the nozzle chart, if you want to produce 2500 psi, you need a single 7.0 nozzle. This is a general cleaning nozzle. Most surface cleaners have 2 tips or 3 tips on the spray bar.

Find your gpm then follow that over to the row of the desired psi and that will be the size tip you need. The 40 degree nozzle is often use as a cleaning nozzle but is most often used as a ‘dusting’ nozzle or high pressure chemical application nozzle. With the right tip, you can harness. For surface cleaners you have to then divide that number by.

Surface Cleaner Tip Chart

What orifice size are the spray tips? As you get into larger machines (5 to 8 gpm) then we would recommend a 24” to 30” surface cleaner. If you need 1.5 orifice spray tips for a lower psi or gpm.

This video shows the easiest method for selecting the proper size of surface cleaner tips for your pressure washer setup. On this video i will explain how to know what tips to use for your surface cleaner. The instructions below are meant to provide new users with enough information to choose the proper sprayer nozzle for their cleaning equipment.

I have gone perpendicular to line of sight and gone back over vertical. Since your surface cleaner has 2 nozzles, you would need 3.5’s. There are other angle sizes not in the catalog that can be custom ordered.

To ensure you choose the proper nozzle size for your application, please use the chart below and follow these steps: Also try entering a desired reduced psi and receive the closest nozzle number to your desired psi. After you choose the degree that you like to use (first 2 digits) you will need to figure out what.

Realistic Cleaning Chart (2) House cleaning tips, Cleaning hacks